← All product support
REXING / PRODUCT SUPPORT

V55.
Your camera.
Ready to record.

Set up your V55 front camera, connect the app and choose the correct parking kit. Match optional accessories to your exact camera version.

Download manual ↗
V55 front camera256GB maxRexing Connect
V55 / AT A GLANCE

Stop. Set. Confirm.

OK

Start or stop recording; confirm a selection.

MENU × 2

Open System Settings after stopping recording.

Hold UP

Enable Wi-Fi; hold for two seconds to disconnect.

01 / QUICK START

Prepare for the first drive.

Mount & power

Apply the adhesive mount and wait at least 20 minutes before attaching the camera. Connect the supplied Mini-USB car charger. The guide describes compatible cabin/rear cameras as optional accessories, sold separately.

Memory card

Use Class 10/UHS-3 or faster microSD up to 256GB, as listed in the V55 guide. Power off before inserting or removing the card.

Format

Back up files, stop recording with OK → MENU twice → UP/DOWN to Format → OK. Formatting erases the card.

02 / CONNECTION & PLAYBACK

Keep important footage.

Wi-Fi

Hold UP, connect your phone to the SSID and password shown on the camera, then open Rexing Connect and tap Connect. A no-internet message can be normal on the camera network. Hold UP for two seconds to disconnect.

Camera playback

Stop recording and hold MENU to change mode. In Playback, use UP/DOWN to select a file and OK to play or pause.

Computer transfer

Use a card reader or the guide’s USB transfer method to copy recordings. For GPS playback, the camera searches for a signal when powered; red GPS speed text changes to green after a fix. MENU twice opens GPS Speed Unit.

03 / PARKING & POWER

Match the kit to the mode.

Smart Hardwire Kit

The vibration option needs a compatible Smart Hardwire Kit. Only enable camera Parking Monitor after installation; the guide recommends High Gravity Sensing for impact events.

Intelligent Hardwire Kit

For sensor-triggered motion recording, use the compatible Intelligent Hardwire Kit and leave camera Parking Mode OFF. The sensor powers the camera when motion is detected.

If recording stops

A kit’s low-voltage cutoff can stop power and parking recordings to protect the vehicle battery. Check vehicle battery condition and the installed kit before changing camera settings. When not using parking mode, the guide recommends Low Gravity Sensing to reduce unnecessary file locks.

RESOURCES / KEEP THESE HANDY

Resources for your V55.

Still need a hand?

Send Support your model label, firmware version and a clear description of the issue.

Contact Rexing →