← All product support
REXING / PRODUCT SUPPORT

V5 Rear Camera.
Connect the rear.
Check the recording.

Rear-camera accessory support based on the V5 family guide. Recordings and settings are controlled by the connected V5 main unit.

Download manual ↗
V5 accessoryMain unit requiredV5 family guide
V5 Rear Camera / AT A GLANCE

Check three things first.

Correct accessory

Match the rear camera and cable to your V5 revision.

Correct port

Connect to the main unit’s rear-camera port.

Saved clip

Confirm rear footage in playback before driving.

01 / CONNECT & MOUNT

Start with the main unit.

Connect the rear camera

With power off, connect the matching rear-camera cable between the rear accessory and V5 front unit. Use the rear-camera port rather than the cabin-camera port.

Mount & route

Choose a clear rear view, mount securely and route the cable without pinching it or obstructing airbags and vehicle controls. Adjust the view while parked.

Check channel selection

The linked guide allows front, rear and cabin accessories to be connected, but says only two channels record at once. Select the intended pair and verify that rear footage is being saved.

02 / STORAGE & PLAYBACK

Confirm the footage you need.

Memory card in the main camera

The V5 guide lists Class 10/UHS-I or faster microSD up to 256GB. The rear accessory does not have a separate card workflow in this guide.

Format on the V5

Back up files first. On the main unit: OK to stop recording → MENU twice → UP/DOWN to Format → OK. This erases stored recordings.

Review & copy

Hold MENU to switch to Playback and use UP/DOWN and OK. For computer transfer, use a card reader or USB Mass Storage. Videos are in CARDV/MOVIE. Test the actual saved rear clip, not only the live preview.

03 / TROUBLESHOOTING

Isolate the connection.

No rear picture

Power down before reseating the correct cable connections. Check the selected recording pair and confirm accessory compatibility. Do not force a connector or substitute a similar-looking camera.

Main-camera Wi-Fi

Wi-Fi is controlled on the V5 main unit: hold OK, join its displayed network, then use Rexing Connect. The guide lists default password 12345678. The rear camera is not paired separately.

Parking recording

Parking operation depends on the main unit and a compatible Smart Hardwire Kit. Confirm the full V5 and accessory setup with Support rather than assuming a universal harness or parking setting.

RESOURCES / KEEP THESE HANDY

Resources for your V5 Rear Camera.

Still need a hand?

Send Support your model label, firmware version and a clear description of the issue.

Contact Rexing →