V3C.
Road & cabin.
One clear guide.
Set up your road and cabin camera using the July 2023 V3C quick start guide. This page keeps V3C separate from V3 and V3 Basic.
Download manual ↗Stop. Set. Confirm.
OK
Start or stop recording; confirm a selection.
MENU × 2
Open System Settings after stopping recording.
Hold UP
Enable Wi-Fi; hold for two seconds to disconnect.
Prepare for the first drive.
Mount & power
Use the electrostatic sticker and adhesive mount, and wait at least 20 minutes before mounting the camera. Connect the supplied Mini-USB car charger.
Memory card
The July 2023 guide lists an included 32GB card and a 256GB maximum, Class 10/UHS-3 or faster. The legacy FAQ instead says 512GB. Use the guide limit until Support confirms your hardware revision. Power off before card removal.
Format
Back up files, stop recording with OK → MENU twice → UP/DOWN to Format → OK. Formatting erases the card.
Keep important footage.
Wi-Fi
Hold UP, connect your phone to the SSID and password shown on the camera, then open Rexing Connect and tap Connect. A no-internet message can be normal on the camera network. Hold UP for two seconds to disconnect.
Camera playback
Stop recording and hold MENU to change mode. In Playback, use UP/DOWN to select a file and OK to play or pause.
Computer transfer
Use a card reader or connect by USB and choose Mass Storage with OK. Videos are in CARDV/MOVIE; locked videos are in CARDV/MOVIE/RO. The rear-camera port is listed as unsupported in this guide.
Match the kit to the mode.
Smart Hardwire Kit
The vibration option needs a compatible Smart Hardwire Kit. Only enable camera Parking Monitor after installation; the guide recommends High Gravity Sensing for impact events.
Intelligent Hardwire Kit
For sensor-triggered motion recording, use the compatible Intelligent Hardwire Kit and leave camera Parking Mode OFF. The sensor powers the camera when motion is detected.
If recording stops
A kit’s low-voltage cutoff can stop power and parking recordings to protect the vehicle battery. Check vehicle battery condition and the installed kit before changing camera settings. When not using parking mode, the guide recommends Low Gravity Sensing to reduce unnecessary file locks.
Resources for your V3C.
V3C quick start guide
202307REV1 · installation, Wi-Fi, playback and parking setup ↗
App resources
Find official Rexing Connect downloads →
Warranty information
Warranty and return information →
Still need a hand?
Send Support your model label, firmware version and a clear description of the issue.