V2 Pro.
Ready for
the road.
Set up road and cabin recording, manage your memory card and save important footage.
Download V2 Pro manual ↗Stop. Set. Confirm.
Use these camera buttons while parked.
OK
Start or stop recording; confirm a selection.
MENU × 2
Open System Settings.
UP / DOWN
Navigate settings and files.
Prepare for the first drive.
Mount with a clear view
Clean the windshield and keep the driver’s view unobstructed. Wait at least 20 minutes after applying the adhesive mount before attaching the camera. Aim both the road and cabin lenses.
Choose a suitable card
V2 Pro supports Class 10 / UHS-I or faster microSD up to 256GB. Power off before inserting or removing the card.
Format in the camera
Stop recording with OK. Press MENU twice, select Format with UP/DOWN, then OK. Confirm the erase warning with OK. Back up needed files first.
Keep a copy of what matters.
Camera playback
Stop recording with OK, hold MENU to cycle to Playback and browse with UP/DOWN. Press OK to play or pause; Use the camera’s playback controls to exit.
Computer transfer
Use a card reader, or connect the camera by mini-USB and select Mass Storage. Copy important recordings to separate storage; protected files are in CARDV/MOVIE/RO.
Rexing Connect
Stop recording with OK. Hold DOWN to enable Wi-Fi, join the SSID using the password shown on the camera, then tap Connect in Rexing Connect. Hold DOWN for three seconds to exit Wi-Fi.
Official app resources →Keep power and storage in view.
Parking power
Parked recording needs an outlet that remains powered or a compatible hardwire kit. Confirm the exact connector, wiring and kit instructions before installation.
Locked recordings
The manual recommends Low Gravity Sensing for routine driving. Locked clips remain protected from loop recording and can fill the card. Save important clips before formatting.
Power loss
The internal backup battery is not a source for extended unplugged recording. If a hardwire kit cuts power for battery protection, the camera cannot record until adequate power returns.
A clearer next step.
Cabin view is absent
Check that a dual-channel resolution is selected. Hold UP to change the displayed view without changing how recordings are captured.
Cabin footage is dark
The manual lists Infrared Light with an Auto setting. Keep the cabin lens clear and check this setting for low-light recording.
Firmware help
Send Support your complete model and current Version before updating. V2, V2 Pro and V2 Pro AI are different models; use only firmware confirmed for your exact revision.
Resources for your V2 Pro.
V2 Pro user manual
Setup, controls & playback
06Rev4 · PDF ↗
Warranty information
Review warranty and return information →
Find another model
Search all product support →
Still need a hand?
Contact Rexing with your V2 Pro model and a photo of the issue.