V1 Gen 3.
Ready for
the road.
Set up your V1 Gen 3, review the legacy Wi-Fi controls and find the original operating guide.
Download V1 Gen 3 manual ↗
Prepare for the first drive.
Mount behind the mirror
Clean the windshield and secure the adhesive mount without obstructing your view. Wait at least 20 minutes before attaching the camera.
Insert the memory card
The V1 Gen 3 guide supports Class 10 / UHS-I or faster microSD up to 256GB. Power off before inserting or removing the card.
Format in the camera
Connect the supplied power cable, press REC to stop recording, then MENU twice for System Settings. Use REC/MIC to select Format and OK to confirm. Formatting erases files; back up first.
Your footage, within reach.
Enable Wi-Fi
Stop recording with REC, then hold OK. Connect your phone to the network and password shown on the camera.
Legacy app instructions
The 2018 guide names TimaCam and its Recorder control. Current availability is unconfirmed; ask Rexing if you cannot find it. For live preview, the guide requires 1440p or lower.
Camera playback
Use MODE for Playback, REC/MIC to browse and OK to play or pause. You can also copy recordings through a card reader or Mini-USB data cable.
Check how the camera is powered.
Power with the ignition off
The original support page specifies a power source that remains on while parked. Some vehicle sockets switch off with the engine; others stay on.
Match the hardwire kit
Have the correct harness and connector confirmed for your V1 Gen 3. Installation and parking settings depend on the camera revision and kit.
Protect the vehicle battery
Follow your exact kit’s battery-protection instructions. If its protection cuts power, the camera cannot continue recording.
Start with the model and symptom.
Which memory card should I use?
The official Gen 3 support page specifies Class 10 / UHS-I or higher microSD up to 256GB. Back up recordings before formatting in the camera.
How do I open Format?
Stop recording, press MENU twice and navigate with REC/MIC. Select Format and confirm with OK. Formatting removes all files.
I cannot find the legacy app
Share your camera firmware and phone operating system with Rexing. Use a card reader for file transfer while the correct app is confirmed.
Can I attach a rear camera?
The V1 Gen 3 guide marks the rear-camera port as unsupported. V1P Gen 3 is a different model.
Help us identify the version
Send the V1 Gen 3 label, firmware screen, card model and power details. This prevents instructions for another V1 generation being mixed into your setup.
The right guide for your V1 Gen 3.
V1 Gen 3 manual
Original operating guide
12/2018Rev3 · PDF ↗
Warranty information
Review warranty and return information →
Find another model
Search all product support →
Still need a hand?
Contact Rexing with your V1 Gen 3 model and a photo of the issue.