S1 Pro.
Connect.
Stay covered.
Set up your three-channel camera, use Rexing Connect and understand parking-monitor power.
Download S1 Pro manual ↗
Start with the right connections.
Secure the camera
Mount close to the rear-view mirror without blocking your view. Follow the guide’s rear-camera installation diagram and keep wiring clear of airbags and moving parts.
Connect power and GPS
Use the supplied power accessories. For GPS, connect the included logger to the GPS socket and orient its receiver face outward, with the adhesive side downward.
Use the built-in storage
S1 Pro uses built-in recording storage; the manual says it does not support memory expansion. Back up important footage before formatting or changing storage settings.
Connect nearby. Keep the footage.
Turn on camera Wi-Fi
Select Wi-Fi ON/OFF on the main menu. Join the camera network shown on its display; the guide uses E89_*** with a default password of 12345678. Use your own displayed details.
Open Rexing Connect
After joining the camera’s Wi-Fi, open Rexing Connect and choose Connect. Use the app to review or download clips and select Record/Stop before changing settings.
Format recording storage
First download the clips you need. In the connected app, stop recording, open Settings and choose Format the memory card. Formatting clears stored recordings.
Playback on the camera
Open Playback from the main menu. Use Up / Down to browse files, then OK to play or pause. Keep a separate copy of important events.
Transfer through USB
Connect the computer cable. Use Up / Down to select Mass Storage in the pop-up and OK to confirm. Copy recordings from the device to your computer.
App & GPS playback
Find official Rexing software resources →
Power protection comes first.
Use the Smart Hardwire Kit
The S1 Pro manual requires the included Smart Hardwire Kit to activate parking monitoring. A USB cable cannot provide this function. Follow the kit’s wiring instructions.
Choose the parking option
With the smart connection detected, open Parking on the main menu. The guide describes time-lapse and Super Night Scene monitoring, plus impact recording lasting one minute. Duration options are 12, 24 or 48 hours.
Set Power Volt protection
The Power Volt menu offers a cutoff from 11.8V to 12.5V. If detected vehicle-battery voltage falls below the selected threshold, the device shuts off to protect the battery.
A clearer next step.
The screen went dark. Did recording stop?
Screen Backlight settings can switch the display off after 1, 3 or 5 minutes while recording continues. Press Power briefly to toggle the backlight.
Why will parking monitoring not start?
Check that the correct Smart Hardwire Kit is connected and detected, review Parking settings and check the Power Volt cutoff. USB power does not activate this parking feature.
Where can I find the software version?
Open Settings → Version. Include it when contacting support. S1 and S1 Pro have different controls and storage; use the S1 Pro guide linked here.
Keep the right guide
Share your S1 Pro label, power-kit details and a photo of the display if an instruction or menu differs from your device.
The right guide for your S1 Pro.
S1 Pro manual
Setup, app & parking
PDF ↗
Warranty information
Review warranty and return information →
Find another model
Search all product support →
Still need a hand?
Contact Rexing with your S1 Pro model and software version.