A clearer view.
A simpler setup.
Connect your HS01, find the right place for its solar panel, and tune motion alerts for your home.
Read the HS01 manual ↗
From the box to Live View.
Complete setup near your router before mounting the camera or solar panel.
- Prepare the battery.Remove the battery’s protective film, insert the battery until it clicks, and slide the cover back until it locks. Fully charge before first use via the USB port; a wall charger is not included.
- Open Rexing Home.Sign up or log in, tap +, then select Rexing HS01.
- Start pairing.Hold the Reset button on the back until the red light flashes.
- Connect to 2.4GHz Wi-Fi.Enter the network name and password in the app. Have the camera scan the QR code displayed on your phone, then confirm when setup finishes.
- Check Live View.Open Live View in the app to confirm a picture before installing the camera.
Good Wi-Fi.
A sunny charging spot.
Test the camera’s connection at your chosen location, then secure the camera and panel.
Check the view and signal.
The manual supports wall, ceiling or tabletop placement, indoors or outdoors. Confirm Live View works at the final position and tighten the camera’s mounting screw.
Choose direct sunlight.
Use an unshaded position with several hours of direct sunlight each day. Secure the mounting arm, attach the panel and adjust its angle before tightening.
Connect the charging lead.
After app setup, connect the solar panel’s Micro USB lead to the camera’s USB port. Check the battery level in regular use and recharge when needed.
Solar charging depends on your conditions.
Sunlight, shade and camera activity affect the balance between charging and battery use. Do not assume the panel will keep the camera charged in every location or season.
Match alerts to your space.
Open the Motion Detection icon in Rexing Home. The manual describes these three activity settings and their battery trade-offs.
Records and notifies most often. The manual identifies this as the shortest battery-life option.
Records and notifies less often than Fast. The manual describes standard battery life.
Records and notifies least often. The manual identifies this as the maximum battery-life option.
Get back to a clear view.
Start with battery charge, the 2.4GHz network and your app settings.
Which app should I use?
The HS01 manual specifies Rexing Home. Search for that exact name in the App Store or Google Play, then add the Rexing HS01 camera. If you cannot find the app in your region, contact Rexing support before trying a different app.
Does HS01 work with 5GHz Wi-Fi?
No. HS01 connects to a 2.4GHz Wi-Fi network. Select your router’s 2.4GHz network and check the password carefully; passwords are case-sensitive.
How do I reconnect after changing my router or password?
Press and hold the Reset button on the back until the red indicator flashes. Follow the app’s Wi-Fi setup again and let the camera scan the QR code shown on your phone.
What if setup will not finish?
Check the 2.4GHz network and password first, then try setup closer to the router. The manual also recommends restarting the router: disconnect its power for 30 seconds, reconnect it, and try again once Wi-Fi is available.
Why is the battery draining quickly?
The manual’s Fast motion setting records and notifies most often and uses the most battery. Medium or Slow reduces event frequency. Check whether the solar panel receives several hours of direct sunlight daily; available charging depends on conditions and use.
How many people can share or view the camera?
The manual supports sharing with up to 8 users. Up to 3 users can view the feed at the same time, while only 1 user can use the intercom. The invited person needs the app and an account.
How do I enable motion notifications?
Enable notifications for Rexing Home in your phone’s settings, then review the camera’s motion settings in the app. For two-way talk, allow microphone access when you choose to use that feature.
Where do I find recordings and cloud storage options?
Open the camera in Rexing Home and check the recording history and storage options available to your account. The 2022 manual describes cloud plans; current availability, retention and pricing should be confirmed in the app or with support.
Why does the camera have a weak Wi-Fi signal?
Distance and obstructions between the camera and router can reduce signal strength. Test closer to the router and adjust the camera or router position before securing the installation.
Your HS01 reference desk.
Still need a hand?
Tell us your HS01 model, phone type, indicator light and what happens during setup.