W1.
Connect your phone.
Bring the road closer.
Set up the 7-inch digital media receiver, wireless CarPlay or Android Auto, vehicle audio and backup camera.
Download manual ↗Pair. Project. Play.
Bluetooth first
Pair with CAR-KIT-XXXX to begin.
Wi-Fi next
The receiver connects to Wi-Fi automatically.
One phone mode
CarPlay and Android Auto cannot be used together.
Prepare the receiver.
Mount & power
Use the supplied mount/holder and power cable. Position the display without blocking your view or vehicle controls. Adjust settings while parked.
Rear-camera connection
Connect the matching backup camera to the rear-camera port. The guide says the red wire is optional for manual viewing; connecting it to the reverse-light circuit enables automatic reverse display. Have a qualified installer verify wiring.
Manual camera view
Tap the rear-camera button to view the backup camera. Confirm the image and orientation while parked before relying on it.
Start with Bluetooth.
Apple CarPlay
Enable phone Bluetooth and Wi-Fi, tap CarPlay on W1, pair CAR-KIT-XXXX and accept Use CarPlay on the iPhone. Contacts/favorites synchronization is optional; CarPlay works without it.
Android Auto
Use a phone that supports wireless Android Auto. Enable Bluetooth and Wi-Fi, select Android Auto on W1 and pair CAR-KIT-XXXX. Allow the Wi-Fi connection to occur automatically rather than manually selecting another network.
Reconnect or disconnect
The receiver remembers the last phone. Turning off phone Wi-Fi or switching networks disconnects projection; forgetting the Bluetooth device requires pairing again. Older guide screenshots and phone menus may differ from current versions.
Hear it through the vehicle.
FM audio
Enable W1 FM transmission and choose an unused frequency. Tune the vehicle radio to the same frequency; change both together if there is interference. The guide lists 91.0 MHz as the default.
AUX audio
The receiver supports 3.5mm AUX output. Connect the supplied cable to a compatible vehicle AUX input and select that input on the vehicle audio system.
Connection checks
If projection does not appear, confirm the correct phone mode, Bluetooth and Wi-Fi, then check the phone’s CarPlay/Android Auto permissions and wireless support. Send Support your phone model and OS version. W1 is a media receiver; do not apply dash-cam memory-card or parking-recording instructions.
Resources for your W1.
W1 user manual
Receiver setup, phone pairing, FM audio and backup camera ↗
Phone compatibility help
Contact Support with receiver and phone details →
Warranty information
Warranty and return information →
Still need a hand?
Send Support your model label, firmware version and a clear description of the issue.