← All product support
REXING / PRODUCT SUPPORT

V1P Gen 3.
Ready for
the road.

Connect your dual cameras and Rexing Connect, then keep important footage.

Download V1P Gen 3 manual ↗
V1P Gen 3Up to 256GB microSDFront + rear
V1P Gen 3 / CONTROL REFERENCE

Stop. Set. Confirm.

Use these camera buttons while parked.

REC

Stop recording before changing settings.

MENU × 2

Open System Settings.

OK

Confirm a selection or play a video.

01 / QUICK START

Prepare both cameras.

Mount securely

Attach the front mount to a clean windshield and connect the rear camera with its supplied cable. Keep the driver’s view and airbag paths clear.

Use a suitable card

The Gen 3 guide specifies Class 10 / UHS-I or faster microSD up to 256GB. Power off before inserting or removing it.

Format before use

Back up files. Stop recording with REC, press MENU twice, choose Format with REC/MIC and confirm with OK. Formatting erases all files.

Gen 3 reference. This page follows the June 2019 06Rev4 guide. Use FHD + FHD for dual-camera recording; single-channel UHD/QHD settings disable the rear camera.
02 / APP & PLAYBACK

Connect nearby. Save a copy.

Wi-Fi

Stop recording, hold REC, join the displayed SSID with its on-screen password and tap Connect in Rexing Connect. Hold REC to exit.

Playback

Hold MENU to switch modes. Browse clips with REC/MIC; OK starts or stops playback. Use a card reader or USB Mass Storage for computer copies.

Front and rear

Hold MIC to change the display. Check both saved views after installation. GPS requires a separate compatible Logger.

03 / POWER

Supply power while parked.

The supercapacitor does not provide long standalone recording. A vehicle socket may switch off with the engine. Confirm a compatible Gen 3 power kit with Rexing for parked recording.

04 / TROUBLESHOOTING

Check the basics first.

MENU will not open

Stop recording with REC first. Hold MENU to change modes; press it to open settings.

The rear picture is missing

Power off, check both cable ends, then restart and inspect a saved rear clip.

Which firmware should I install?

Send Rexing the label and current version. Gen 3, Basic, Pro and Max are different revisions.

05 / RESOURCES

The right guide for your V1P Gen 3.

Still need a hand?

Contact Rexing with your V1P Gen 3 model and a photo of the issue.

Contact Rexing →