V33.
Ready for
the road.
Set up road, cabin and rear recording, connect Rexing Connect and understand your parking power kit.
Download V33 manual ↗Stop. Set. Confirm.
Use these camera buttons while parked.
OK
Stop recording before changing settings.
MENU × 2
Open System Settings.
HOLD UP
Enable Wi-Fi while recording is stopped.
Prepare for the first drive.
Mount behind the mirror
Clean and dry the windshield. Apply the electrostatic sticker behind the mirror and the adhesive mount in the guide’s orientation. Wait at least 20 minutes before mounting the camera. Aim the front and cabin lenses, then connect and aim the supplied rear camera.
Insert the memory card
The July 2023 V33 guide supports Class 10 / UHS-I or faster microSD up to 512GB. Power off before inserting or removing the card.
Format in the camera
Connect the supplied power cable, press OK to stop recording, then MENU twice for Setup Settings. Use DOWN to select Format and OK to confirm. Formatting erases files; back up first.
Connect nearby. Save a copy.
Enable camera Wi-Fi
Stop recording, then hold UP to enable Wi-Fi. Join the SSID shown on the camera with the on-screen password, then tap Connect in Rexing Connect.
Open Rexing Connect
Stay connected to the camera network, open Rexing Connect and tap Connect. The camera Wi-Fi is a local connection and may show no internet.
Review and disconnect
Use the app to view or download recordings. Hold UP for two seconds to disconnect Wi-Fi.
Playback on the camera
Stop recording with OK, then hold MENU for three seconds to switch between Recording and Playback. Use UP/DOWN and OK to select and review a file.
Computer transfer
Power off, remove the card and use a card reader to copy recordings. Preserve important footage in separate storage.
Rexing Connect
Find official app resources →
Match the power kit to the mode.
Vibration detection
Use the compatible Smart Hardwire Kit, sold separately. Significant movement can trigger event recording. High Gravity Sensing is recommended for parking events.
Motion detection
Use the compatible Rexing Intelligent Hardwire Kit, sold separately. It powers the camera when motion is detected. Keep the camera’s Parking Mode off for this setup.
Low-voltage protection
When the exact kit’s battery protection cuts power, the camera cannot record parking events. Check its documented settings and restore adequate power according to the kit instructions.
A clearer next step.
Settings will not open
Press OK to stop recording first. MENU once opens the current mode’s settings; MENU twice opens System Settings.
The card fills with locked files
Back up needed clips, review Gravity Sensing sensitivity and format the card in the camera when appropriate. Locked clips are not overwritten by normal loop recording.
The phone joins Wi-Fi but the app fails
Stay on the network displayed by the V33, open Rexing Connect and tap Connect. Do not switch to your home Wi-Fi during the connection.
How do I connect the rear camera?
With power off, connect the supplied rear camera to the front unit with the rear cable. Mount it as shown in the guide and check the rear picture and saved footage before driving.
Identify your V33 revision
Send the complete model, label photo, firmware version and power-kit details. Confirm the V33 model, not V33 Plus, before selecting firmware.
The right guide for your V33.
V33 manual
Setup, app & parking
July 2023 · PDF ↗
Warranty information
Review warranty and return information →
Find another model
Search all product support →
Still need a hand?
Contact Rexing with your V33 model and a photo of the issue.