V1P SE.
Ready for
the road.
Set up your front and rear cameras, connect Rexing Connect and match the parking kit to your recording mode.
Download V1P SE manual ↗Stop. Set. Confirm.
Use these camera buttons while parked.
REC
Stop recording before changing settings.
MENU × 2
Open System Settings.
OK
Confirm a selection or play a video.
Prepare for the first drive.
Mount behind the mirror
Clean and dry the windshield. Position the electrostatic sticker behind the mirror, then attach the correctly oriented adhesive mount. Wait at least 20 minutes before mounting the camera.
Insert the memory card
The July 2023 V1P SE guide supports Class 10 / UHS-I or faster microSD up to 512GB. Power off before inserting or removing the card.
Format in the camera
Connect the supplied power cable, press REC to stop recording, then MENU twice for System Settings. Use REC/MIC to select Format and OK to confirm. Formatting erases files; back up first.
Connect nearby. Save a copy.
Enable camera Wi-Fi
Hold the REC/MIC navigation button to display the camera Wi-Fi name and password. Join that network in your phone’s Wi-Fi settings using the password shown on the camera.
Open Rexing Connect
Stay connected to the camera network, open Rexing Connect and tap Connect. The camera Wi-Fi is a local connection and may show no internet.
Review and disconnect
Use the app to view or download recordings. Hold REC for two seconds to disconnect Wi-Fi.
Playback on the camera
Stop recording with REC and use MODE to enter Playback. Browse with REC/MIC, then press OK to play or pause. MIC fast-forwards and REC rewinds.
Computer transfer & glare control
Power off, remove the card and use a card reader to copy recordings. Preserve important footage in separate storage. Rotate the included front/rear CPL filters to adjust glare.
Rexing Connect
Find official app resources →
Match the power kit to the mode.
Vibration detection
Use the compatible Smart Hardwire Kit, sold separately. The guide identifies UPC 857080006565. Gravity Sensing triggers event recording after significant movement; High sensitivity is recommended for parking events.
Motion detection
Use the compatible Rexing Intelligent Hardwire Kit, sold separately; the guide identifies UPC 810046603178. It powers the camera when motion is detected. Keep the camera’s Parking Mode off for this setup.
Low-voltage protection
When the exact kit’s battery protection cuts power, the camera cannot record parking events. Check its documented settings and restore adequate power according to the kit instructions.
A clearer next step.
Settings will not open
Press REC to stop recording first. MENU once opens the current mode’s settings; MENU twice opens System Settings.
The card fills with locked files
Back up needed clips, review Gravity Sensing sensitivity and format the card in the camera when appropriate. Locked clips are not overwritten by normal loop recording.
The phone joins Wi-Fi but the app fails
Stay on the network displayed by the V1P SE, open Rexing Connect and tap Connect. Do not switch to your home Wi-Fi during the connection.
How do I connect the rear camera?
With power off, connect the supplied rear camera to the front unit with the rear cable. Mount it as shown in the guide and check the rear picture and saved footage before driving.
Identify your V1P SE revision
Send the complete model, a photo of the label, firmware version and power-kit details. This helps distinguish the V1P SE from other V1P models.
The right guide for your V1P SE.
V1P SE manual
Setup, app & parking
July 2023 · PDF ↗
Warranty information
Review warranty and return information →
Find another model
Search all product support →
Still need a hand?
Contact Rexing with your V1P SE model and a photo of the issue.