V1P Pro.
Ready for
the road.
Set up front and rear recording, find GPS resources and troubleshoot your V1P Pro.
Request the right manual →Stop. Set. Confirm.
Use these camera buttons while parked.
REC
Stop recording before changing settings.
MENU × 2
Open System Settings.
MIC
Scroll to Format in the Setup menu.
Prepare for the first drive.
Mount both cameras
Stick the front mount to a clean windshield, then slide the camera into the mount. Use the rear camera’s adhesive pad on the rear windshield.
Choose a suitable card
The official V1P Pro support page specifies Class 10 / UHS-I or faster microSD, up to 256GB. Use a card intended for dash-camera recording.
Format before recording
Stop recording. Press MENU twice for Setup, then use MIC to find Format. Back up needed recordings first: formatting erases the card.
Keep a copy of what matters.
Wi-Fi viewing
V1P Pro supports local Wi-Fi for live viewing and copying files to a phone. Match app and pairing instructions to your firmware; request the exact guide if your controls differ.
Official app resources →Camera & computer
Use Playback Mode on the camera. For computer transfer, remove the card and use a card reader, or use the included mini-USB computer cable.
Built-in GPS
The internal GPS logger writes route and speed data to recordings. Compatible playback software is needed to view it.
GPS player resources →Recording needs a power source.
Power while parked
Parked recording requires power while the engine is off. Confirm whether the vehicle outlet stays powered; otherwise use a compatible hardwire kit.
Confirm the exact kit
Check the connector, kit label and installation instructions before choosing parking settings. Similar Rexing kit names can have different detection behavior.
Supercapacitor
The supercapacitor does not supply extended unplugged recording. If a kit’s battery protection cuts power, the camera cannot record until adequate power returns.
A clearer next step.
Rear camera connection
The rear camera receives power from the front unit and saves video to the front camera’s card. Check the connecting cable if the rear view is absent.
Mirrored rear preview
The rear camera’s switch flips the display preview horizontally. The official support FAQ states this does not mirror the saved recording.
Version-specific help
Send Support your complete model, firmware version and camera-label photo. V1P Pro, Gen 3, Max and Flex X4 use different guides.
Resources for your V1P Pro.
Request the manual
The legacy download is unavailable.
Ask Support for your exact revision →
Warranty information
Review warranty and return information →
Find another model
Search all product support →
Still need a hand?
Contact Rexing with your V1P Pro model and a photo of the issue.